A stress and displacement discontinuity element method for elastic transversely anisotropic rock     

A. Bobet  V. García Marín 《国际地质力学数值与分析法杂志》2014,38(18):1898-1922

The paper presents closed‐form solutions for stress and displacement influence functions for stress discontinuity (SD) and displacement discontinuity (DD) elements, for a two‐dimensional plane‐strain elastic, transversely anisotropic medium. The solutions for SD elements are based on Kelvin's problem and for DD elements on the concept of dipoles. Stress and displacement influence functions are derived for the following elements: constant SD, linear SD, constant DD, linear DD, square root DD, parabolic DD, constant DD surface, and linear DD surface elements. The formulations are incorporated into FROCK, a hybridized boundary element method code, and are validated by providing comparisons between the results from FROCK and the finite element code ABAQUS. A limited parametric analysis shows the effects of slight anisotropy on the stress field around the tip of a crack and of the orientation of the crack with respect to the axes of elastic symmetry. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

High to ultrahigh temperature contact metamorphism and dry partial melting of the Tasiuyak paragneiss,Northern Labrador     

R. K. Mitchell  A. Indares  B. Ryan 《Journal of Metamorphic Geology》2014,32(6):535-555

Contact aureoles of the anorthositic to granitic plutons of the Mesoproterozoic Nain Plutonic Suite (NPS), Labrador, are particularly well developed in the Palaeoproterozoic granulite facies, metasedimentary, Tasiuyak gneiss. Granulite facies regional metamorphism (M_R), c. 1860 Ma, led to biotite dehydration melting of the paragneiss and melt migration, leaving behind biotite‐poor, garnet–sillimanite‐bearing quartzofeldspathic rocks. Subsequently, Tasiuyak gneiss within a c. 1320 Ma contact aureole of the NPS was statically subjected to lower pressure, but higher temperature conditions (M_C), leading to a second partial melting event, and the generation of complex mineral assemblages and microstructures, which were controlled to a large extent by the textures of the M_R assemblage. This control is clearly seen in scanning electron microscopic images of thin sections and is further supported by phase equilibria modelling. Samples collected within the contact aureole near Anaktalik Brook, west of Nain, Labrador, mainly consist of spinel–cordierite and orthopyroxene–cordierite (or plagioclase) pseudomorphs after M_R sillimanite and garnet, respectively, within a quartzofeldspathic matrix. In addition, some samples contain fine‐grained intergrowths of K‐feldspar–quartz–cordierite–orthopyroxene inferred to be pseudomorphs after osumulite. Microstructural evidence of the former melt includes (i) coarse‐grained K‐feldspar–quartz–cordierite–orthopyroxene domains that locally cut the rock fabric and are inferred to represent neosome; (ii) very fine‐ to medium‐grained cordierite–quartz intergrowths interpreted to have formed by a reaction involving dissolution of biotite and feldspar in melt; and (iii) fine‐scale interstitial pools or micro‐cracks filled by feldspar interpreted to have crystallized from melt. Ultrahigh temperature (UHT) conditions during contact metamorphism are supported by (i) solidus temperatures >900 °C estimated for all samples, coupled with extensive textural evidence for contact‐related partial melting; (ii) the inferred (former) presence of osumilite; and (iii) titanium‐in‐quartz thermometry indicating temperatures within error of 900 °C. The UHT environment in which these unusual textures and minerals were developed was likely a consequence of the superposition of more than one contact metamorphic event upon the already relatively anhydrous Tasiuyak gneiss.  相似文献   

基于ABAQUS的深水连接器连接性能分析     

曹博  蔡志杰  石中玉  张玉龙  段梦兰 《海洋工程》2020,38(3):132-139

为解决现有深水连接器连接性能研究中力学分析建模不准确,且缺乏抗弯抗扭能力分析的问题,基于ABAQUS有限元分析软件对深水连接器进行三维模型动态仿真分析,对连接器的受力、密封性能以及在实际工程需求中不同内压下的抗弯及抗扭性能进行深入研究。结果表明:在安装及生产两种工况下,深水连接器各部件除密封环外受力均满足其强度设计要求,密封环接触表面发生合理塑性变形,满足密封要求;随着内压的增加,深水连接器的抗弯能力逐渐下降,抗扭能力则呈现增加的趋势;极限弯矩分别在0 MPa与35 MPa内压下的判定依据为密封失效,在14 MPa与52 MPa内压下的判定依据为下毂座屈服,而极限扭矩在不同内压下的判定依据均为密封失效。  相似文献   

KK型管节点应力集中系数几何敏感性分析     

林海花  孙承猛  石强 《海洋工程》2020,38(6):142-150

KK型管节点是自升式平台桁架式桩腿中的一种管节点，其应力集中系数是影响桩腿疲劳寿命的重要参数。应力集中系数与管节点的几何形式密切相关，为分析KK型管节点应力集中系数对几何参数的敏感性，利用ANSYS软件对某KK型管节点进行几何参数化建模，利用有限元数值模拟方法对各工况下的热点应力进行分析，并分别计算各相应工况下的名义应力，然后将热点应力与名义应力相比得到不同几何参数下的热点应力集中系数。对计算结果进行整理分析，得到了KK型管节点应力集中系数对无量纲几何参数的敏感性规律。结果表明，应力集中系数与撑杆受力状态、管节点结构形式有关，在满足结构布置、建造工艺和其他安全性指标的前提下，分析结果能够为KK型管节点的结构设计和疲劳分析提供技术支撑。  相似文献   

Concurrent Determination of U‐Pb Age and REE Mass Fractions of Zircon by High Mass Resolution SIMS     

Yu Liu  Qiu‐Li Li  Guo‐Qiang Tang  Xian‐Hua Li 《Geostandards and Geoanalytical Research》2020,44(3):421-437

A combined geochronological and geochemical investigation for the same domain of zircon provides valuable information on timing and genesis, particularly in the case of multi‐growth metamorphic zircon. A high spatial resolution concurrent analytical method for zircon U‐Pb age and rare earth element content was successfully achieved in this study, using a multi‐collector secondary ion mass spectrometer (SIMS) at a ~ 8 μm diameter scale. Special instrument parameters were employed, including a high mass resolution of approximately 15000 applied to replace the previous energy filter method, and a dynamic multi‐collector mode used to reduce the measurement time to 18 min per analysis. Six zircon reference materials yielded precise and accurate ²⁰⁶Pb/²³⁸U ages, which are comparable to those obtained by the ordinary mono‐collector method, but with 2–3 times higher spatial resolution. All zircon grains measured in this study showed enriched heavy‐REE (HREE) contents consistent with previously reported values determined by LA and solution ICP‐MS methods. The light‐REE (LREE) mass fractions measured using both SIMS and LA‐ICP‐MS methods in this study, although with quite different volume, show consistent results within uncertainties.  相似文献   

基于GIS的“一带一路”地区气温插值方法比较研究     

杨艳昭  郎婷婷  张超  贾琨 《地球信息科学学报》2020,22(4):867-876

“一带一路”倡议是新时期中国为加强对外开放提出的全球化合作倡议,资源环境的优化配置对全球化发展意义重大。气温作为重要的基础数据和输入要素,对其进行空间化处理是实现大尺度区域资源环境优化配置的前提。本文基于地理信息技术（GIS）,运用距离平方反比法（IDS）、协同克里格法（CK）、回归距离平方反比法（RIDS）和回归协同克里格法（RCK）,对“一带一路”地区1980—2017年的2679个气象站点的月平均气温和年平均气温数据进行插值,获得了“一带一路”地区10 km分辨率的气温空间分布数据。交叉验证结果表明：① IDS、CK、RIDS和RCK插值法在整体上均较好地展示了“一带一路”地区气温的地理空间分布规律,4种插值方法的月均气温的均方根误差分别在1.93~2.43、1.78~2.14、1.31~2.23和1.23~1.92 ℃之间;年均气温的均方根误差分别为1.94、1.83、1.37和1.27 ℃;② 在“一带一路”地区,加入协变量分析的CK插值精度整体优于IDS,并且削弱了IDS的极值现象;③ RIDS和RCK对年均气温的插值精度分别较IDS和CK提高了29.4%和30.6%,表明加入地理要素并进行残差修正的插值精度得到了进一步提高。总体来看,RCK插值法对气温数据的插值精度最高,可以考虑将此方法作为“一带一路”地区温度等气象要素的插值方法。  相似文献   

冀中坳陷中部现今热岩石圈厚度及地热学意义探讨     

崔悦  朱传庆  邱楠生  唐博宁  郭飒飒 《地质学报》2020,94(7):1960-1969

热岩石圈厚度是研究盆地的构造演化和板块动力学的重要参数,本文通过实测数据构建地壳分层模型,根据热传导的基本原理,计算了冀中坳陷中部的Moho面温度以及热岩石圈厚度,并探讨其地热学意义。结果表明:冀中坳陷中部的Moho面温度分布在500～600℃,西南侧整体温度较东北部高,热岩石圈厚度介于102～122km,其平面展布特征与华北克拉通热岩石圈厚度西厚东薄的特征相吻合,为华北克拉通受太平洋板块西向俯冲导致东部遭受破坏提供了依据,并且较薄的岩石圈使热流更易传导到地壳浅部,成为了该地区热异常的成因背景。  相似文献   

Adsorption Mechanism and Kinetic Characterization of Bituminous Coal under High Temperatures and Pressures in the Linxing-Shenfu Area     

TAO Chuanqi  WANG Yanbin  LI Yong  NI Xiaoming  GAO Xiangdong 《《地质学报》英文版》2020,94(2):399-408

The majority of coalbed methane(CBM) in coal reservoirs is in adsorption states in coal matrix pores. To reveal the adsorption behavior of bituminous coal under high-temperature and high-pressure conditions and to discuss the microscopic control mechanism affecting the adsorption characteristics, isothermal adsorption experiments under hightemperature and high-pressure conditions, low-temperature liquid nitrogen adsorption-desorption experiments and CO2 adsorption experiments were performed on coal samples. Results show that the adsorption capacity of coal is comprehensively controlled by the maximum vitrinite reflectance(Ro, max), as well as temperature and pressure conditions. As the vitrinite reflectance increases, the adsorption capacity of coal increases. At low pressures, the pressure has a significant effect on the positive effect of adsorption, but the effect of temperature is relatively weak. As the pressure increases, the effect of temperature on the negative effect of adsorption gradually becomes apparent, and the influence of pressure gradually decreases. Considering pore volumes of pores with diameters of 1.7-100 nm, the peak volume of pores with diameters 10-100 nm is higher than that from pores with diameters 1.7-10 nm, especially for pores with diameters of 40-60 nm, indicating that pores with diameters of 10-100 nm are the main contributors to the pore volume. The pore specific surface area shows multiple peaks, and the peak value appears for pore diameters of 2-3 nm, indicating that this pore diameter is the main contributor to the specific surface area. For pore diameters of 0.489-1.083 nm, the pore size distribution is bimodal, with peak values at 0.56-0.62 nm and 0.82-0.88 nm. The adsorption capability of the coal reservoir depends on the development degree of the supermicroporous specific surface area, because the supermicroporous pores are the main contributors to the specific pore area. Additionally, the adsorption space increases as the adsorption equilibrium pressure increases. Under the same pressure, as the maximum vitrinite reflectance increases, the adsorption space increases. In addition, the cumulative reduction in the surface free energy increases as the maximum vitrinite reflectance increases. Furthermore, as the pressure increases, the surface free energy of each pressure point gradually decreases, indicating that as the pressure increases, it is increasingly difficult to adsorb methane molecules.  相似文献   

榍石LA-SF-ICP-MS U-Pb定年及对结晶和封闭温度的指示   总被引：1，自引：0，他引：1  

赵令浩  曾令森  詹秀春  胡明月  袁继海  孙冬阳  张立飞 《岩石学报》2020,36(10):2983-2994

榍石富含U、Th，贫Pb，是U-Pb定年的理想矿物之一。本文采用激光剥蚀-高分辨等离子体质谱建立榍石U-Pb定年方法，采用25~30μm激光斑束，准确测定榍石U-Pb标准样品BLR-1（~1048Ma）、OLT-1（~1014Ma）和Pakistan（~21.4Ma），以及年轻榍石样品（<100Ma）U-Pb年龄，提高了检测准确性和空间分辨率。综合对比共生锆石和榍石U-Pb年龄、榍石颗粒微量元素和U-Pb年龄环带及不同成分岩浆岩（SiO₂含量48.1%~77.0%）中岩浆榍石的结晶温度，结果表明：岩浆演化过程中，榍石具有宽泛的结晶温度（600~900℃，峰值~750℃），主要集中于岩浆演化中晚期结晶，榍石U-Pb同位素封闭温度接近或略低于锆石，因此同一岩浆体系中锆石与榍石的年龄差异可能反映了该熔体较晚达到榍石饱和，而非熔体热演化历史或封闭温度信息。  相似文献   

级配碎石填料大三轴试验及累积塑性应变预测模型     

杨志浩  岳祖润  冯怀平  叶朝良  马德良 《岩土力学》2020,41(9):2993-3002

级配碎石作为重载铁路基床表层的主要填料，其受列车荷载的影响最大。因此，研究级配碎石在循环荷载作用下的动力行为及累积塑性应变演化特征变得尤为重要。首先，通过制备不同细粒含量的级配碎石填料，开展一系列大型动三轴试验，探究细粒含量、围压及动应力幅值对循环荷载作用下试样累积塑性应变的耦合影响机制。其次，基于塑性安定理论，确定不同应力水平下试样的动力行为，得到考虑围压及细粒含量参数的塑性蠕变状态临界动应力计算模型。最后，结合试验数据，建立考虑应力水平及细粒含量参数的塑性蠕变动力行为累积塑性应变预测模型，并明确各参数的物理意义。其研究成果可为既有重载铁路路基健康状态评估及考虑强度、变形综合控制的路基结构设计提供参考。  相似文献